Miele KFN 14827 SDE ed/cs страница 27 Скачать руководство пользователя | Manualshive

Страница: 27 / 88

background image

Your appliance has been fitted with a
warning system which ensures that the
temperature in the freezer section
cannot rise unnoticed and to avoid
energy being wasted if a door is left
open.

Activating the alarm system

The alarm system is always active. It
does not have to be switched on
manually.

Temperature alarm

An alarm will sound if the temperature
in the freezer section becomes too
warm.

The alarm off sensor will flash red and
the "Freezer" symbol will flash.

The alarm will sound, the alarm off
sensor will flash red and the freezer
symbol will flash, for example,

– if a lot of room air enters the freezer

section when food is being loaded,
rearranged or taken out.

– when freezing large amounts of food

at once.

– when freezing food which is still

warm.

– in the event of a power cut.

The alarm will stop and the symbols will
go out as soon as the temperature has
dropped down to the correct level
again.

Switching the temperature
alarm off early

If the noise disturbs you, you can
switch the alarm off early if you wish.

^

Touch the alarm off sensor.
The alarm will stop.
The alarm off sensor and the freezer
symbol will continue to flash until the
correct temperature has been
reached.

However, if the temperature in the
freezer section remains above
-18 °C for a long time, check that the
frozen food has not started to
defrost. If it has, check that the food
is safe to use and if it is, then use it
as soon as possible.

Alarm

27

«
...
25
26
27
28
29
...
»

Содержание KFN 14827 SDE ed/cs

























































































Отзывы:

Нет отзывов

Похожие инструкции для KFN 14827 SDE ed/cs

Бренд: Haier Страницы: 34

Бренд: Dacor Страницы: 2

Бренд: Dacor Страницы: 20

Бренд: Dacor Страницы: 156

Бренд: Dacor Страницы: 20

Бренд: V-ZUG Страницы: 24

Бренд: Grundig Страницы: 104

Бренд: NEFF Страницы: 86

Бренд: Beper Страницы: 36

Бренд: U-Line Страницы: 44

Бренд: Logik Страницы: 36

Millennium DAR452BL

Бренд: Danby Страницы: 30

Бренд: Küppersbusch Страницы: 60

Бренд: Everglades Страницы: 78

Бренд: GE Страницы: 2

Бренд: Amica Страницы: 32

Бренд: Vinotemp Страницы: 9

Бренд: McCall Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды