^
Remove cap
l
from the bush in the
door and refit on the opposite side.
Refitting the lower door:
^
Remove cover
a
by pulling it
forwards.
^
Pull cover
b
off.
^
Screw foot
c
into hinge pin as far as it
will go.
^
With the help of another person,
carefully tilt the appliance backwards
and pull hinge pin
c
out.
^
Take care not to lose hinge bush
d
.
^
Undo screws
e
and take hinge plate
f
off.
^
Remove cover
g
and refit on the
opposite side.
^
Refit hinge plate
f
onto the other
side using the 2
outer
screws. To
make it possible to align the door
later, do not replace the
centre
screw at this stage.
^
Unscrew part
h
from hinge plate
f
,
rotate it by 180° and refit into the hole
on the opposite side of the hinge
plate.
^
Refit cover
b
on the opposite side.
^
With the help of another person,
carefully tip the appliance back and
refit hinge pin
c
from below into
hinge plate
f
. The notch at the
bottom of the hinge plate should face
forwards.
^
Replace hinge bush
d
on hinge pin
c
.
^
Refit cover
a
.
^
Place the lower door onto hinge pin
c
from above.
^
Close the lower appliance door.
Changing the door hinging
56
