Before building the appliance in decide
on the door hinging. If left hand door
hinging is required follow these
instructions.
^
Pull covers
a
and
b
off.
^
Open out fixing bracket
f
and
unscrew it. It is used later on the
other side for securing the appliance
into the housing niche.
^
Use a pointed instrument to take off
cover
e
.
^
Half unscrew the outer screw
d
and
completely unscrew the inner screw
on hinge plate
c
. This will make the
appliance door easier to take off.
^
Open the upper door of the
appliance a little, and push it
upwards and outwards a little
together with hinge plate
c
. Then lift
the appliance door upwards and off.
^
Pull hinge plate
a
and hinge pin
b
out of the appliance door, turn hinge
plate
a
around, and refit everything
on the other side of the appliance
door. Do not forget to use washer
c
.
^
Use a pointed instrument to take
cover
g
off.
^
Remove hinge pin
d
, tilt the lower
appliance door and take it off.
^
Use a screwdriver to remove plug
j
.
^
Replace the lower hinge pin
i
together with its washer
h
on the
other side.
Changing the door hinging
45
