Before using for the first time
The stainless steel surface has a
protective cover to prevent scratching
during transportation.
^
Do not remove this cover until the
appliance has been installed or built
in. Start at one of the upper corners.
^
Clean the inside of the appliance and
the accessories. Use warm water and
a little washing up liquid and dry with
a soft cloth.
Switching on
The refrigerator section and the freezer
section are switched on independently
of one another so that, if required, you
can switch on only one section.
Refrigerator section
^
Press the On/Off button for the
refrigerator section.
Bars appear in the temperature display
of the refrigerator section. The
refrigerator section starts cooling. The
interior light will come on when the door
is opened.
Freezer section
^
Press the On/Off button (Master
switch) for the freezer section.
Bars appear in the temperature display
for the freezer section and the alarm
sounds. The freezer section starts
cooling.
Allow the freezer to run for a few hours
before placing food in it. This will
ensure that the temperature in the
freezer is sufficiently low.
Switching off the alarm
^
Press the alarm button.
The alarm stops. The bars will continue
flashing in the temperature display until
the temperature which has been set is
reached.
Ice pack
Place the ice pack in the top drawer of
the freezer section. The ice pack will be
at its most effective after it has been in
the freezer for approx. 24 hours.
Operation
11
