The appliance will automatically
return to normal operation after
approx. 5 minutes if you do not
press any buttons whilst in setting
mode.
Setting the temperature in the
freezer section
Use the two buttons to the right hand
side of the temperature display to set
the temperature for the freezer section.
Press the
Upper button: to raise the temperature
(it gets warmer)
Lower button: to reduce the
temperature (it gets colder)
The temperature being set will flash in
the display.
When pressing the buttons the
following are shown in the display:
– When first pressed the
last
temperature selected
flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the current
actual
temperature of the freezer is
automatically shown.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full
and
for
approx. 24 hours if the appliance is
full
as it will take this long for the
display to show the accurate
temperature of the appliance. If, after
this time, the temperature is still too
high or too low, you will need to adjust it
again.
Temperature range
The temperature in the freezer section
can be adjusted from -14 °C to -28 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
The correct temperature
14