Miele KF 1801 Vi Скачать руководство пользователя страница 20

Страница: 20 / 88

Temperature
(Fahrenheit/Celsius)

The temperature can be displayed in
degrees Celsius or degrees Fahrenheit.

Touch the access sensor so that it is
highlighted in yellow.

Touch the sensor for the refrigerator
zone so that it is highlighted in
yellow.

Take note of the position of the

sensor (but do not touch it!).

Touch the access sensor until it is
highlighted in white and all of the
other sensors are no longer lit up.

Place your finger in the position of the

sensor, and leave it there.

At the same time, briefly touch the
access sensor (without letting go of
the

sensor).

Leave your finger on the

sensor for

another 4 seconds until

and the

sensor also appear in the display.

Now touch the

sensor repeatedly

until

†

appears in the display.

Touch the access sensor again.

By touching the

sensor, you can

now set the temperature to be
displayed in Fahrenheit or Celsius.

† 0

: Temperature in Fahrenheit

† 1

: Temperature in Celsius

†

–: Return to menu.

After selecting a new setting, touch
the access sensor to confirm your
choice.

Now touch the

sensor repeatedly

until

appears in the display.

Touch the access sensor again.

You have now left settings mode.

The door alarm is automatically
disabled when the appliance is in
settings mode. As soon as the door
is closed, the door alarm is activated
again.

The correct temperature

Содержание KF 1801 Vi

























































































Результаты поиска

Содержание KF 1801 Vi

Отзывы:

Бренды по названию

Популярные бренды

Miele KF 1801 Vi, Руководство по эксплуатации и установке

Результаты поиска

Содержание KF 1801 Vi

Отзывы:

Бренды по названию

Популярные бренды