Miele KDN 9713 iD, Инструкции по эксплуатации и монтажу

Страница: 30 / 48

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Make sure that water cannot get into
the temperature selector or into the
light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
^
Switch the appliance off by turning
the temperature selector to "0" and
then switching off at the socket and
removing the plug.
^
Take any food out of the appliance
and store it in a cool place.
^
Take out any removable parts, e.g.
shelves, for cleaning.
Cleaning the interior and
accessories
Use warm water with a little washing-up
liquid. Wash all accessories and
drawers by hand only. Do not wash in a
dishwasher.
^
Clean the appliance at least once a
month.
^
Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^
After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the doors
open to air the appliance for a short
while.
E-Cloth
^
A microfibre “E-Cloth” is available
from the Miele UK Spare Parts
Department, which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals. It can
be washed 300 times.
Ventilation gaps
^
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
Cleaning and care
30