The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow these instructions to
change it over.
It is essential that the changing of
the door hinging is carried out by
two people.
^
Open the lower appliance door.
^
Remove cover plate
a
, and ease off
plinth
b
using a screwdriver.
^
Remove hinge bolts
c
using a
spanner.
^
Tilt the lower door forward, and lift it
down and off.
^
Take care not to lose the door
bearing bush
d
.
^
Open the door the upper appliance
door.
^
Remove covers
e
.
^
Unscrew middle door bearing
f
, and
lift the door down and off, taking care
not to lose the washer.
^
Using a size 10 spanner, unscrew top
bearing pin
g
, and replace on the
opposite side.
^
Remove plugs
h
from the middle of
the appliance, and refit them on the
opposite side.
^
Hang the upper door on top bearing
pin
i
, and leave the door open.
^
Insert middle door bearing
f
into the
upper door from below remember to
use the washer) and screw tightly.
While doing so, push the upper door
up as far possible.
^
Fit covers
e
.
Changing the door hinging
35
Содержание KD 1450 S
