Miele K 9457 iD-4 Скачать руководство пользователя страница 12

Страница: 12 / 56

Before using for the first time

Protective foil

The stainless steel trim, frames and
panels have a layer of protective foil to
prevent scratching during
transportation.

Carefully remove the protective foil
from them.

Cleaning and care

After removing the protective foil,
treat stainless steel surfaces with the
Miele stainless steel conditioning
agent supplied with the appliance
(available to re-order from
www.miele-shop.com).

Important! Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellent
protective coating.

Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.

Switching on

Press the On/Off button.

The temperature display lights up, the
appliance starts cooling and the interior
light will come on when the door is
opened.

To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.

Switching off

Press the On/Off button until the
temperature display goes out.

The cooling system is switched off. (If
this does not happen, the safety lock is
still activated).

Switching on and off

Содержание K 9457 iD-4

























































Результаты поиска

Содержание K 9457 iD-4

Отзывы:

Похожие инструкции для K 9457 iD-4

Бренды по названию

Популярные бренды

Miele K 9457 iD-4, Руководство по эксплуатации и установке

Результаты поиска

Содержание K 9457 iD-4

Отзывы:

Похожие инструкции для K 9457 iD-4

Бренды по названию

Популярные бренды