Miele K 8767 S ed, Руководство по эксплуатации и установке

Страница: 12 / 40

Before using for the first time
The stainless steel surface has a layer
of protective foil to prevent scratching
during transportation.
^
Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between ½ and 1 hour after
transporting it to its final location
before connecting it to the mains.
Switching on
^
Press the On/Off button.
The temperature display lights up, the
appliance starts cooling. The interior
light will come on when the door is
opened.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching off
^
Press the On/Off button until the
temperature display goes out.
The cooling system is switched off. (If
this does not happen, the safety lock is
still activated).
Safety lock
The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
Activating or de-activating the safety
lock
^
Press and hold the Super cool button
for approx. 5 seconds.
The Super cool indicator light flashes
and a
;
flashes in the temperature
display.
^
Press the Super cool button again.
;
lights up in the temperature display.
^
You can now choose between
;
0
and
;
1
by pressing the temperature
selector buttons:
0
: the safety lock is de-activated,
1
: the safety lock is activated.
^
Press the Super cool button to save
the setting.
The safety lock indicator light
X
will
light up when the safety lock has been
activated.
^
Press the On/Off button to come out
of the setting mode.
The electronics will then switch over to
normal operation after a couple of
minutes.
Switching on and off
12