Miele K 621 Ui-1, Инструкции по эксплуатации и монтажу

Страница: 34 / 40

^
Then tighten screws
a
in a clockwise
direction until a resistance is felt.
If there is a continuous plinth in the
kitchen, a ventilation gap will need to
be made in the plinth for the appliance:
Building-under
height [mm]
Dimension H
[mm]
820
870 60+1
110+1
The ventilation gaps must not be
covered over.
Fitting a furniture door
^
A gap of 8 mm must be maintained
between the appliance door and the
fixing bracket.
^
Push fitting aids
a
up to the height of
the furniture door: the lower edge "X"
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see
-
on
the diagram).
^
Undo nuts
b
, and take fixing bracket
c
off together with the fitting aids.
Building in the appliance
34