Miele K 35422 iD Скачать руководство пользователя | Manualshive

Страница: 36 / 88

background image

Adjusting the interior fittings

36

Adjusting the door shelf /
bottle shelf



Lift up the door shelf / bottle shelf
and pull it towards you to remove it.



Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.

Adjusting the bottle holder

The bottle holder can be moved to the
left or right to create more room for
drink cartons.

The bottle holder can be removed
completely, e.g. for cleaning:



Lift up the bottle shelf and pull it
towards you to remove it.



Detach the bottle holder from the
back edge of the bottle shelf.

Adjustable shelf / Adjustable
shelf with lighting

The LED lighting is located on the
stainless steel strip of the shelf. By
adjusting the position of the shelves in
the refrigerator section, you can change
the illumination in this section according
to your needs.

If the LED lighting is not working,
check if the shelves are positioned
correctly on the shelf supports.
The shelves have metal discs
(contacts) at the front left corner which
supply power to the LED lighting.
Make sure when inserting the shelves
that the contacts click into position in
the shelf supports.

Moving the adjustable shelf /
adjustable shelf with lighting

The shelves can be adjusted according
to the height of the food.



Raise the shelf and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.

The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.

Stoppers prevent the shelves from
being dislodged by mistake.

«
...
34
35
36
37
38
...
»

Содержание K 35422 iD

























































































Отзывы:

Нет отзывов

Похожие инструкции для K 35422 iD

Бренд: Iceking Страницы: 12

Бренд: GE Страницы: 64

Бренд: AYA Страницы: 30

Бренд: iGenix Страницы: 16

Бренд: Gaggenau Страницы: 40

Бренд: Zanussi Electrolux Страницы: 20

Бренд: U-Line Страницы: 55

Бренд: BOMANN Страницы: 36

Бренд: Acqua Страницы: 20

Бренд: VOX electronics Страницы: 186

Бренд: Ariston Страницы: 40

Бренд: point Страницы: 80

Бренд: Stirling Страницы: 24

Бренд: Dometic Страницы: 24

Бренд: Continental Refrigerator Страницы: 2

Бренд: Pkm Страницы: 58

Бренд: Caple Страницы: 17

Бренд: Haier Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды