Miele K 34673 iD, Инструкции по эксплуатации и монтажу

Страница: 44 / 92

Cleaning and care
44

Do not let water get into the
electronic unit or the lighting.

Steam from a steam cleaning ap-
pliance could reach the electrical
components and cause a short cir-
cuit.
Do not use a steam cleaning appli-
ance to clean the appliance.
Cleaning water must not get into the
drain hole.
The data plate located inside the ap-
pliance must not be removed. It con-
tains information which is required in
the event of a service call.
Cleaning agents
To avoid damaging the surfaces of your
appliance,
do not use:
– cleaning agents containing soda, am-
monia, acids or chlorides,
– cleaning agents containing descaling
agents,
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and brushes,
e.g. pot scourers,
– melamine eraser blocks,
– sharp metal scrapers.
We recommend treating stainless steel
surfaces with Miele stainless steel
conditioning agent (see “Guide to the
appliance - Optional accessories”).
Unlike stainless steel cleaning agents,
the conditioning agent does not con-
tain any abrasive substances and will
gently remove soiling. Each time it is
used, it forms a water and dirt repel-
lent protective coating.
Cleaning and conditioning agents
used inside the appliance must be
food safe.
We recommend using lukewarm water
with a little washing-up liquid to clean
surfaces of the appliance.
The following pages contain import-
ant information on cleaning.