Miele K 34472 iD Скачать руководство пользователя страница 62

Страница: 62 / 92

Deactivating demo mode

The

symbol is lit up in the display.

Touch the settings sensor.

All symbols available for selection
appear in the display and the

symbol

flashes.

Touch the sensors for setting the
temperature (

), repeatedly until

the

symbol flashes.

Touch the OK sensor to confirm your
selection.

flashes in the display (this means:

demo mode is activated), the

symbol

lights up.

Touch the

sensor, until

appears (this means: demo mode is
deactivated).

Touch the OK sensor to confirm your
selection.

The selected setting is applied, the

symbol flashes.

Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits
settings mode automatically after
approximately one minute.

Demo mode is deactivated, the

symbol goes out.

Information for dealers

Содержание K 34472 iD





























































































Результаты поиска

Содержание K 34472 iD

Отзывы:

Бренды по названию

Популярные бренды

Miele K 34472 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 34472 iD

Отзывы:

Бренды по названию

Популярные бренды