Changing the door hinging
58
To change over the spring clamp
press down on the catch and pull the
spring clamp forwards:
Changing the lower hinge plate
over
Pull hinge pin
complete with
washer
and adjusting foot
up-
wards to remove.
Remove stopper
.
Undo the screws
and remove the
hinge plate
.
Loosen the screw for the door closing
aid
in hinge plate
. Refit the door
closing aid
in the hole on the other
side of the hinge plate and then
tighten the screw up again.
Insert stopper
into the other hole.
Remove cover
.
Take screw
out and screw it into
the outside hole on the opposite side.
Turn cover
through 180° and refit it
on the opposite side.
Screw hinge plate
securely into
position on the new hinge side.
Refit the entire hinge pin
, including
the washer
and adjustable foot
.
Important! The tab on the hinge pin
must still face downwards.
Place door
onto the hinge pin from
above.
Close the appliance door.
Содержание K 28202 D edt/cs
Страница 61: ......
Страница 62: ......
Страница 64: ...M Nr 10 538 950 00 en GB K 28202 D ws K 28202 D edt cs ...