Miele K 2214 S, Руководство по эксплуатации и установке

Страница: 18 / 28

Repairs to electrical appliances
should only be carried out by a suit-
ably qualified and competent person
in accordance with local and na-
tional safety regulations. Unauthor-
ised repairs could be dangerous.
The following can be corrected without
contacting the Miele Service Depart-
ment:
. . . strange noises can be heard after
switching on the appliance, espe-
cially after it has just been installed.
^
Check to see whether any pieces of
furniture next to the appliance are vi-
brating whilst the appliance is in op-
eration.
Switch the appliance off then:
^
Check whether the appliance is
aligned correctly.
^
Check whether all parts at the rear of
the appliance are free from
hinderance. Remove any hinderance.
^
Check whether the cable clips were
unclipped from the back of the appli-
ance before installation. They could
vibrate when the appliance is operat-
ing.
^
Are all removable parts securely lo-
cated in the appliance?
^
Are bottles or containers touching
each other?
Remember that the noise of the com-
pressor and the coolant circulating in
the system is unavoidable.
. . . the appliance does not get cool.
^
Make sure the temperature selector is
not set at "0".
^
Check that the plug is correctly in-
serted in the socket.
^
Check that the fuse is not defective
and that the mains fuse has not
blown. If it has contact the Miele Ser-
vice Department.
. . . the temperature in the refrigerator
is too low.
^
Turn the temperature selector to a
setting closer to "0".
^
The super cool function has not been
switched off. The indicator light is still
on.
. . . the appliance is switching in too
frequently and for too long.
^
Check whether ventilation gaps have
been covered over or become too
dusty.
^
Check whether, the metal grille (heat
exchanger) at the rear of the appli-
ance has become too dusty.
^
The appliance door has been
opened too frequently.
^
Check that the door has been closed
properly.
Problem solving guide
18