![background image](http://html.mh-extra.com/html/miele/k-1803-sf/k-1803-sf_operating-and-installation-instructions_236416048.webp)
Aligning the housing unit
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
– The side panels of the housing must
be even.
– The housing unit panels must be at
least 5/8" (16 mm) thick.
– The plinth facing must be at least
1/2" (13 mm) thick, preferably 3/4"
19 mm).
Check the installation niche
To ensure a safe, trouble-free
installation and the best possible
cosmetic result, check to be sure
that the installation space complies
with the installation requirements.
^
Check the base (see "Installation").
^
Check the dimensions of the cavity.
^
Check that the cavity is square.
^
Check the location of the power
outlet.
^
Check that all furniture parts in the
vicinity of the appliance are securely
connected to the wall.
^
Check that the adjacent
furniture/fixtures do not collide with
the open door.
Before installation
,
Caution - the appliance is very
heavy. Use caution when unpacking
and opening the door, danger of
tipping.
^
To protect the base from damage
during installation, attach a hard
board, linoleum, etc., to the floor in
front of the intended installation
location.
^
Remove any cable clips from the
back of the appliance.
^
Take the supplied accessories out of
the protective packaging.
Installing the appliance
48
www.goedekers.com
Содержание K 1803 SF
Страница 35: ...35 www goedekers com ...
Страница 62: ...62 www goedekers com ...
Страница 63: ...63 www goedekers com ...
Страница 64: ...M Nr 09 920 730 00 en US CA K 1803 SF K 1903 SF www goedekers com ...