Miele K 14820 SD ed Скачать руководство пользователя страница 43

Страница: 43 / 52

Slide soft-close mechanism bracket

as far as it will go towards the

handle side of the door, and undo
screws

on the soft-close

mechanism.

Using a flat-bladed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.

Then place it to one side.

Changing over the door

Make sure the door shelves are
empty!

Close the door.

Remove cover

by sliding it

forwards from the back and then
lifting it off.

Remove cover

by pulling it

upwards.

Caution. The appliance door is not
secure as soon as the hinge plate is
removed.

Loosen screws

in upper hinge

plate

and pull it upwards and off.

Carefully lift the door off and place it
to one side.

Gently loosen cover

by carefully

inserting a flat-bladed screwdriver
into the gap.

Remove cover

together with

retainer

Then separate

from cover

, by

pushing it slightly to the left and then
pulling the cover forwards and off.

Rotate retainer

by 180°.

Then fit cover

from the front over

retainer

, and push it over to the

right. The writing must be visible.

Remove cover

, rotate it by 180°

and fit it to the opposite side.

Then fit cover

together with

retainer

on the opposite side.

Changing the door hinging

Содержание K 14820 SD ed





















































Результаты поиска

Содержание K 14820 SD ed

Отзывы:

Похожие инструкции для K 14820 SD ed

Бренды по названию

Популярные бренды

Miele K 14820 SD ed, Руководство по эксплуатации и установке

Результаты поиска

Содержание K 14820 SD ed

Отзывы:

Похожие инструкции для K 14820 SD ed

Бренды по названию

Популярные бренды