Miele K 12421 SD Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 48

Miele K 12421 SD Скачать руководство пользователя страница 26

Ventilation gaps

^

The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.

Door seal

Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.

The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.

Metal grille at the back of the
appliance

The metal grille at the back of the
appliance (heat exchanger) should be
dusted at least once a year. A build-up
of dust will increase the energy
consumption of the appliance.

When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.

After cleaning

^

Replace all shelves and accessories
in the appliance.

^

Reconnect to the mains and switch
the appliance back on.

^

Place food back in the appliance and
close the door.

Cleaning and care

26

«
...
24
25
26
27
28
...
»

Содержание K 12421 SD

















































Отзывы:

Нет отзывов