With a
building under height of
820 mm
the plinth height can be set
between
100 - 170 mm
.
With a height >
100 mm
a cutout for
ventilation must be provided in the
plinth (see "Appliance installation").
A
building under height of 870 mm
is
obtained by adjusting the appliance
feet. This increases the height of the
plinth, which, in this case, can be
150 -
220 mm
.
With a height >
150 mm
a cutout for
ventilation must be provided in the
plinth (see "Appliance installation").
A furniture front panel is required for
installing the appliance as an
integrated unit. If the appliance is
installed at the end of a run of kitchen
units, a furniture side panel may also be
required, depending on on-site
conditions.
The socket (
9
) should be freely
accessible and is best positioned to the
side of the appliance.
Building in dimensions
32