Duvet covers
^
First do up the poppers/buttons. Start
the first run by carefully feeding this
end in first on left side of the roller,
taking care not to damage any but-
tons.
Note: Only pass this end through the
ironer if the poppers or buttons are
heat-resistant.
To iron without a fold:
^
It is best to iron the cover in two runs
lengthwise.
If folds are acceptable:
^
Fold the duvet cover lengthwise and
iron both sides.
Pillow cases
^
Lay the pillowcase on the feeder
plate, position under the hot plate
and iron in one procedure.
If the open end has poppers or but-
tons only pass it through the ironer if
they are heat resistant.
To press skirts
These are best ironed without the feed
board.
^
Pull the skirt over the roller from the
hem to the waistband.
^
Lay a damp cloth over it.
^
Iron each section of the skirt in turn.
Points on ironing
16
