Operation
54
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a sensor has been
pressed or after the end of a
programme.
Press the
sensor to switch the
dishwasher back on.
The dishwasher will not switch off
automatically if the time of day display
has been activated (see "Settings menu
- Time of day").
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
At the end of the programme
The buzzer might sound at the end of
the programme.
The programme has finished when
Prog.
finished
appears in the display and the
door has opened slightly (if applicable).
In the
QuickPowerWash
programme the
door will not open until a few minutes
after the programme has finished.
If the
Display consumption
programmable
function is switched on, you can now
use the
Consumption
option to view the
actual energy and water consumption
of the programme which has just
finished (see "Settings - Consumption").
The drying fan may continue to run for
a few minutes at the end of the
programme.
You can now empty the dishwasher.
If you have deactivated the
automatic door opening function (see
"Settings menu - AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Содержание HG05
