Miele H 5981 BP Скачать руководство пользователя

Страница: 17 / 88

FlexiClip telescopic runners

The FlexiClip telescopic runners can be
clipped into any of the existing shelf
runners and pulled out of the oven to
their fullest extent.

Push the telescopic runners right in
before placing a tray or rack on
them.

To prevent the risk of a rack or tray
sliding off the runners, make sure that
they are sitting securely on their
runners in between the stoppers at
either end of each runner.

The FlexiClip runners can support a
maximum load of 15 kg.

Fitting the FlexiClip telescopic runners

Make sure that the oven has cooled
down before moving the FlexiClip
runners.
Take care not to burn yourself on them.

The FlexiClip runners are fitted in between
the two rails that make up a shelf level.

The telescopic runner with the Miele
logo is fitted on the right.

When fitting the FlexiClip runners

not

extend them.

Fit the FlexiClip runner in between the
two rails at the front (1) and then push
it into the oven compartment (2).

Then secure the FlexiClip runner to the
bottom of the two rails as illustrated (3).

If the FlexiClip runners are difficult to
pull out after fitting, you may need to
pull firmly on them once to release
them.

Features

Содержание H 5981 BP

























































































Результаты поиска

Содержание H 5981 BP

Отзывы:

Похожие инструкции для H 5981 BP

Бренды по названию

Популярные бренды

Miele H 5981 BP, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание H 5981 BP

Отзывы:

Похожие инструкции для H 5981 BP

Бренды по названию

Популярные бренды