Miele H 5681 B Скачать руководство пользователя страница 62

Страница: 62 / 84

To remove the oven door

The oven door is connected to the oven
by hinges.

Before removing the door, the locking
clamps on both hinges have to be
released.

Open the door fully.

To release the locking clamps on the
hinges turn them upwards as far as
they will go until they are at an angle.
See illustration.

Then lift the door upwards to its
resting position.

Do not attempt to take the door off
the hinge guides when it is in a
horizontal position. The hinge guides
will close, and damage the
appliance. Danger of inury.

Hold the door securely at both sides
and lift upwards off the hinge guides.

Do not lift the door off by the handle.
The handle could break and
damage the door.

Make sure that you lift the door off
equally on both sides.

Cleaning and care

Содержание H 5681 B





















































































Результаты поиска

Содержание H 5681 B

Отзывы:

Похожие инструкции для H 5681 B

Бренды по названию

Популярные бренды

Miele H 5681 B, Руководство по эксплуатации и установке

Результаты поиска

Содержание H 5681 B

Отзывы:

Похожие инструкции для H 5681 B

Бренды по названию

Популярные бренды