The glass cover is held in position by
two metal brackets which are secured
to the reflector.
Do not push the metal brackets to
the sides, as this would damage
both the brackets and the reflector.
It might also make it difficult to push
the glass cover back into its frame
again.
^
Pull the glass cover out of the rear
metal brackets.
On some models the halogen lamp
cover will come out together with the
glass cover.
^
Pull the defective halogen lamp out
and replace it with a new one, mak-
ing sure it goes into its socket hori-
zontally.
When purchasing a new lamp it is a
good idea to take the old one with
you to make sure you get the correct
replacement (12 V, 20 W, heat resis-
tant to 300 °C, G4 fitting, Osram,
Type 64428).
Do not touch the surface directly
when changing the lamp as grease
particles from your fingers will ad-
here to the surface and damage the
lamp. Please follow the manufac-
turer's instructions.
Correcting minor faults
70
Содержание H 373-2 B
Страница 87: ...87 ...