Starting the programme
^
Select the
Start
option.
The message
Please close the door
will appear.
If you want to select a different
programme or make other changes,
select
Back
and cancel the programme
with the
Cancel
function.
^
Start the programme by closing the
door.
The In-operation indicator light comes
on to show that a programme has been
started.
If you open the door
Add-an-item
may
appear in the display.
As long as this prompt is showing,
crockery can be added without
compromising the wash results.
,
Water in the dishwasher may be
hot. Danger of scalding.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Display
The duration of the programme
selected appears in hours and minutes
in the display before the programme
begins. During the programme, the
time left until the end of the programme
is displayed.
The time displayed may vary with the
same programme. This can be due,
among other factors, to the water
temperature at each intake, the
reactivation process, the type of
detergent, the amount of crockery and
how dirty it is.
When a programme is selected for the
first time, the display shows an average
time for a cold water intake.
The times shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the time
required.
Operation
47