Extended drying
If desired drying results are not consis-
tently achieved, the turbothermic cool-
ing fan can be programmed to run an
extra 14 minutes at the end of each
program.
The "Extended drying" feature can also
be activated to prevent condensation
from collecting on the steam deflector.
Turning extended drying on/off
^
Make sure the dishwasher is turned
off.
^
Press and hold the "Start/Stop" (17)
button and at the same time turn the
dishwasher on using the "On/Off" but-
ton.
Release the "Start/Stop" button within
two seconds.
^
Press the "Top Solo" (18) button.
The "Salt" (15) indicator will flash and
the "End" (16) indicator will light.
If this is not the case, the above steps
must be repeated.
The extended drying time is
off
if the
top program indicator
flashes
.
The extended drying time is
on
if the
top program indicator
lights
.
If the the correct drying time is set:
^
Turn off the dishwasher.
If the drying time is incorrect:
^
Press the "Top Solo" button (18).
^
Press the "Start/Stop" (17) button
twice.
The "Start/Stop" (17) indicator will flash.
The changed extended drying option
will be stored.
^
Turn off the dishwasher.
Operation
33
