Guide to the appliance
21
Display functions
The display is used to select or set the
following:
- The programme
- Options
- The timer
- The
Settings
The display can show the following:
- The programme name
- The programme stage
- The estimated time left for the pro-
gramme to run
- The energy and water consumption
(EcoFeedback)
- Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensor controls dur-
ing this time.
Touch the
sensor control to switch
the dishwasher back on.
The sensor controls on the control
panel and in the display react to finger-
tip contact.
The touch display can be scratched
by pointed or sharp objects, e.g.
pens.
Only touch the display with your fin-
gers.
Touch the required menu option to se-
lect it.
The currently selected setting is marked
in orange and can be changed.
The
OK
sensor control in the display is
used to confirm a message or setting
and to move to another menu level.
To exit a sub-menu again, use the
Back sensor control.
Touch the
sensor control at any time
to return to the Programme menu.
If you do not press any sensor controls
for several seconds, the display will re-
vert to the previous menu. You will then
have to enter your settings again.