Miele G 7919, Руководство по эксплуатации

Страница: 48 / 132

Settings
48
Temperature
The temperature can be displayed in
°C/Celsius or °F/Fahrenheit.
The factory default setting is °C/
Celsius.
Display
You can set the display brightness and
the type of display.
Brightness
You can set the display brightness to
one of seven different levels.
Colour scheme
You can select a black or white colour
scheme for the display.
Volume
A sequence of warning tones will sound
at the end of the programme or if there
is a fault, provided that the signal tones
are activated.
Signal tones in the event of a fault
In the event of a fault, the alarm tone
will sound four times at intervals with a
short pause between each set of tones.
The alarm tone that sounds when
there is a fault cannot be
deactivated.
Signal tones
The signal tones at the end of a
programme will sound four times at
intervals with a short pause between
each tone.
The volume of the signal tones at the
end of the programme can be set to
one of seven different settings. If no
volume is selected, the signal tones are
switched off.
Keypad tone
An audible tone sounds each time a
sensor outside of the touch display is
pressed.
The volume for the keypad tone can be
set to one of seven different settings. If
no volume is selected, the keypad tone
is switched off (except for the
 On/
Off sensor).
Welcome melody
When you switch the dishwasher on or
off, a brief melody sounds.
You can switch this melody off.