Miele G 7782, Руководство по эксплуатации

Страница: 49 / 52

^
Pull up and remove the two filters.
^
Clean the filters.
^
The filter assembly is then replaced
in the reverse order in which it was
removed.
CAUTION: The washer/disinfector
must not be used without all filters in
place.
3. Cleaning the water inlet filters
Filters are incorporated into the stain-
less steel housing located between the
supply valve and the hose.
The filters must be cleaned when dirty,
otherwise insufficient water will flow into
the wash cabinet. These filters must be
periodically inspected based on the
quality of incoming water.
^
Turn off the valves.
^
Unscrew the water inlet hoses.
^
Clean the large area filter (1) and the
fine filter (2) or replace if necessary.
^
After reconnection, turn on the valves
and test for leaks.
Maintaining the dispensing
system
The dispensing system should be
main-tained at regular intervals in order to
guarantee optimum safety and efficiency.
^
The tubes in the dispensing system
should be replaced every 2 years.
Cleaning and care
45
1
2