Cleaning and care
82
Cleaning the drain pump
If water remains in the wash cabinet
after the end of a programme, the water
has not been pumped away. The drain
pump may be blocked by foreign
objects. These foreign objects are easy
to remove.
Disconnect the dishwasher from the
power supply.
To do this, switch off at the socket
and withdraw the plug.
Take the filter combination out of the
wash cabinet (see “Cleaning and care
- Cleaning the filters”).
Scoop the water out of the wash
cabinet using a suitable container or
utensil.
Press the catch of the drain pump
cover inwards
.
Tip the cover inwards until it is
released
.
Rinse the cover thoroughly under
running water and remove all foreign
objects.
Содержание G 7104
