Before using for the first time
26
Add salt reminder
When
Insufficient salt
appears in the
display wait until the end of the
programme and then refill the salt
reservoir.
Confirm with
OK
.
The message will go out.
Risk of corrosion.
Immediately after filling the salt
reservoir, run the
QuickPowerWash
programme with the
Short
programme option selected and
without any crockery in the
dishwasher to remove any traces of
salt from the cabinet.
After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. If this is
the case, confirm again with
OK
.
The refill reminder will be switched off if
you have programmed the dishwasher
for a water hardness below 0.9 mmol/l
(5 °d - German scale).
If you only ever use combination
products containing salt and rinse aid
in your dishwasher, you can switch the
reminders off if you wish (see
"Settings menu, Refill reminders").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add salt
and rinse aid and to switch the
reminders back on.
Содержание G 6993
