Miele G 6980 страница 92 Скачать руководство пользователя

Страница: 92 / 100

Water connection

Connection to the water sup‐

ply



Water in the dishwasher must

not be used as drinking water.

– The dishwasher may be connected to

a cold or hot water supply up to a

maximum of 140°F/60°C.

We would only recommend connec‐

tion to a hot water supply if it is eco‐

nomical, e.g. a solar-powered supply.

When connected to a hot water sup‐

ply, all program stages which would

otherwise be carried out with cold

water will be carried out with hot wa‐

ter.

– The

Energy Saver

program (if availa‐

ble) requires a hot water supply be‐

tween 115°F/45°C (minimum) and

140°F/60°C (maximum).

The higher the water intake tempera‐

ture, the better the cleaning and dry‐

ing results.

– The intake hose is approx. 4' 11"/

1.5 m long. A 1.5 m long flexible met‐

al extension hose (pressure tested to

2,030 psi) is available as an optional

accessory, if required.

– A faucet with a 3/8" male thread

must be provided on site.

– This appliance is constructed to

comply with ANSI/ASSE 1001 //

IEC/EN/DIN 61770 // VDE 0700 Part

600, and may be connected to a suit‐

able supply without an extra non-re‐

turn valve if national regulations per‐

mit.

– Water pressure: Must be between

4.5 - 145 psi (0.3 - 10 bar) If the wa‐

ter pressure is lower than this, the

fault message

Intake

will appear in

the display (see "Frequently asked

questions"). If the water pressure is

too high, a pressure reducer valve

must be fitted.

After connecting the dishwasher to

the water supply, check that the wa‐

ter intake is airtight.



To avoid any damage to the ap‐

pliance, the dishwasher must only be

connected to fully vented pipework.



The intake hose must not be

shortened or damaged in any way as

it contains electrical components.

Содержание G 6980





































































































Результаты поиска

Содержание G 6980

Отзывы:

Похожие инструкции для G 6980

Бренды по названию

Популярные бренды

Miele G 6980, Руководство по эксплуатации

Результаты поиска

Содержание G 6980

Отзывы:

Похожие инструкции для G 6980

Бренды по названию

Популярные бренды