Frequently Asked Questions
76
Water intake fault
Problem
Possible cause and solution
All TimeControl func‐
tion controls are flash‐
ing quickly.
The warning buzzer is
sounding.
One of the following
faults appears in the
display:
Water intake fault.
Please open the water sup-
ply
The water supply is turned off.
Turn on the water supply all the way.
Water intake fault
Before fixing the fault:
Turn the dishwasher off using the
sensor but‐
ton.
There is a problem with the water intake.
Turn on the water supply fully and start the pro‐
gram again.
Clean the water intake filter (see "Frequently asked
questions").
The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.
The following message
appears in the display
during the
Energy Saver
program:
Water in. temp too low
The intake water has not reached the required tem‐
perature of 120°F (45°C) (see "Water connection -
Water intake").
Start the program again.
If the fault message appears again, select a differ‐
ent program.
Содержание G 6980
Страница 88: ...88 ...
Страница 97: ......
Страница 98: ......
Страница 100: ...M Nr 10 014 210 04 en US G 6980 G 6985 ...