Programming the water hardness
level
^
Switch the dishwasher off using the
On/Off button (13).
^
Press the
$
(19) and Start/Stop (17)
buttons in and whilst doing so press
the On/Off button (13) to switch the
dishwasher on.
Then release these buttons.
The Wash/Rinse indicator light (16) and
the fifth programme indicator light * (14)
(factory setting) will come on and the
Salt indicator light (15) will flash.
If this is not the case the process must
be repeated.
* The programme settings on the control panel
run from top to bottom.
Setting the machine for water hardness
level 0.2 – 6.3 mmol/l (1°d - 35°d):
^
Use the programme buttons (19) to
select the programme that
corresponds to your water hardness
level (see Table 1).
The indicator light next to the selected
programme (14) will start flashing and
the Wash/Rinses indicator light (16) will
come on.
Table 1:
°d
(German scale)
mmol/l
Programme
position
1 - 4
0.2 - 0.7
1
5 - 7
0.9 - 1.3
2
8 - 10
1.4 - 1.8
3
11 - 13
2.0 - 2.3
4
14 - 16
2.5 - 2.9
5
17 - 22
3.1 - 4.0
6
23 - 35
4.1 - 6.3
7
^
Press the Start/Stop button (17) twice.
The programmed water hardness level
is now stored in memory.
^
Switch the dishwasher off using the
On/Off button (13).
Before using for the first time
14
Содержание G 693-4
Страница 59: ...Cutlery tray Comparison tests 59 ...
Страница 61: ...Cutlery tray Comparison tests 61 ...
Страница 67: ...67 ...
