Miele G 6900 страница 71 Скачать руководство пользователя

Страница: 71 / 100

Problem solving guide

Unsatisfactory washing result

Problem

Cause and remedy

The dishes are not

clean.

The dishes were not loaded correctly.



See notes in "Loading the dishwasher".

The programme was not powerful enough.



Select a more powerful programme (see

"Programme chart").

There is some stubborn soiling although most of the

crockery is only lightly soiled (e.g. with tea stains).



Use the

Sensor wash

programme option (see

"Settings menu, Sensor wash").

Not enough detergent was dispensed.



Use more detergent, or change your detergent.

Items are blocking the path of the spray arms.



Rearrange the items so that the spray arms can

rotate freely.

The filter combination in the base of the wash cabinet

is not clean or is not correctly fitted.

This may cause the spray arm jets to get blocked.



Clean and/or fit the filter combination correctly.



Clean the spray arm jets, if necessary (see

"Cleaning and care, Cleaning the spray arms").

The non-return valve is open and blocked. Dirty water

has flowed back into the wash cabinet.



Clean the drain pump and the non-return valve

(see "Maintenance, Cleaning the drain pump and

non-return valve").

Smearing appears on

glassware and cutlery.

There is a bluish sheen

on the surface of

glassware; film can be

wiped off.

The rinse aid dosage is set too high.



Reduce the dosage (see "Settings menu, Rinse

aid").

Содержание G 6900





































































































Результаты поиска

Содержание G 6900

Отзывы:

Похожие инструкции для G 6900

Бренды по названию

Популярные бренды

Miele G 6900, Руководство по эксплуатации

Результаты поиска

Содержание G 6900

Отзывы:

Похожие инструкции для G 6900

Бренды по названию

Популярные бренды