Guide to the appliance
8
Display
General
The display is used to select or set the
following:
– the programme
– the FlexiTimer (Delay start)
– the Settings menu
The display can show the following:
– the stage the programme is at
– the estimated time left for the pro-
gramme to run
– the energy and water consumption
(EcoFeedback)
– any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
To switch the dishwasher back on
again, press the
button.
Settings menu
The Settings menu is used to alter the
dishwasher's electronics to suit differ-
ent requirements. You access the Set-
tings menu by pressing a specific but-
ton combination (see "Settings menu").
The arrows in the display indicate fur-
ther options. You can use the
arrow
buttons next to the display, as appropri-
ate, to select these further options.
The
OK
button is used to confirm a
message or setting and also to move to
the next menu or another level.
The option which is selected will have a
tick
next to it.
To exit a sub-menu, use the
arrow
buttons to select the
Back
option in
the display and confirm your choice
with
OK
.
If you do not press any of the buttons
for several seconds, the display with re-
turn to the previous level. You may need
to enter your settings again.
Содержание G 6820
