Miele G 663, Руководство по эксплуатации

Страница: 14 / 72

Procedure...
n
lit up
n
flashes
Open the door.
Switch the dishwasher off with the “Off” touch (
o
) pad.
Press touch pads
b
and
d
in and whilst doing so
at the same time switch the dishwasher on with the
“On” (
g ) touch pad.
On Salt
Release pads
b
and
d
again.
On Salt +
c
Note: If a different indicator light is flashing , the pro-
cess must be repeated.
The following indicator lights may also light up , if:
– you have not yet added rinse aid or if rinse aid
needs replenishing,
Rinse aid
– drying heat had been switched off (see “Additional
functions”),
b
– the water intake time has been increased (see “In-
crease water intake time”),
d
– the buzzer at the end of a programme is switched off
(see “Additional functions”).
e
Press touch pad
c
.
On Salt
If a water hardness level of between 1 °d and 12 °d has
been programmed in, a further indicator light will come
on:
1 - 4 °d (0.2 - 0.7 mmol/l):
5 - 6 °d (0.9 - 1.1 mmol/l):
7 °d ( 1.3 mmol/l):
8 - 10 °d (1.4 - 1.8 mmol/l):
11 - 12 °d (2.0 - 2.2 mmol/l):
If no additional indicator lights come on, a water hard-
ness level of between 13 °d and 70 °d (2.3 -12.6
mmol/l) has been programmed in.
b
c
d
e
f
Before using for the first time
14