Problem solving guide
74
Water inlet fault
Problem
Possible cause and remedy
One of the following
messages appears in
the display:
Open stopcock
The tap is turned off.
Turn on the tap fully.
Water intake
Before rectifying the problem, you must:
Switch the dishwasher off with the
button.
Water intake is restricted.
Turn on the tap fully and start the programme
again.
Clean the water inlet filter (see "Maintenance").
The water pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.
The following message
appears in the display
during the
SolarSave
pro‐
gramme:
Intake temp. low
The intake water has not reached the required tem‐
perature of 45°C (see "Water connection - Connec‐
tion to the water supply").
Start the programme again.
If the fault message appears again, select a differ‐
ent programme.
Содержание G 6510
