Problem
Possible cause
Remedy
The indicator light
“Inlet/Outlet” is flashing
and the programme
does not continue
Before rectifying the
problem you must:
–
Turn the programme
selector to the “Stop”
position.
–
Switch the dishwasher
off using the “On/Off”
button.
Water intake is restricted.
–
Open the stopcock
fully.
–
Check the water inlet
filter and clean if
necessary, see
“Cleaning the water
inlet filter”.
–
Check the water level
and if necessary
increase the water
intake time, see
sections on these.
Water outlet is restricted.
Water remains in the
wash cabinet at the end
of a programme.
–
Clean the filter
combination, see
“Cleaning and Care”.
–
Clean the drain pump,
see “Cleaning the
drain pump and non-
return valve”.
–
Clean the non-return
valve, see “Cleaning
the drain pump and
non-return valve”.
–
Remove any kink in the
drain hose.
Problem solving guide
43