Water connection
72
Water intake
ɘ
Water in the dishwasher must
not be used as drinking water.
– The dishwasher may be connected to
a cold or hot water supply up to a
maximum of 140°F/60°C.
We would only recommend connec‐
tion to a hot water supply if it is eco‐
nomical, e.g. a solar-powered supply.
When connected to a hot water sup‐
ply, all program stages which would
otherwise be carried out with cold
water will be carried out with hot wa‐
ter.
– The intake hose is approx. 4' 11"/1.5
m long. A 1.5 m long flexible metal
extension hose (pressure tested to
2,030 psi) is available as an optional
accessory, if required.
– This appliance is constructed to
comply with ANSI/ASSE 1001 //
IEC/EN/DIN 61770 // VDE 0700 Part
600, and may be connected to a suit‐
able supply without an extra non-re‐
turn valve if national regulations per‐
mit.
– The water pressure (flow pressure at
the take-off point) must be between
4.35 - 145 psi. If the water pressure
is too high, a pressure reducer valve
must be fitted.
After connecting the dishwasher to
the water supply, check that the wa‐
ter intake is airtight.
ɘ
To avoid any damage to the ap‐
pliance, the dishwasher must only be
connected to fully vented pipework.
ɘ
The intake hose must not be
shortened or damaged in any way as
it contains electrical components
(see illustration).
- A faucet with a 3/8" male thread must be
provided on site.
Содержание G 6100
Страница 4: ...Contents 4 Sound emission testing 74 ...
Страница 77: ......
Страница 78: ......
Страница 80: ...M Nr 10 014 090 03 en US G 6100 G 6105 ħ ...