Miele G 605 Скачать руководство пользователя

Страница: 57 / 68

Installation integrated “i” Dishwashers

Drill the fixing holes to a depth of
about 10 mm, using a 2.5 mm drill bit.

Secure the fixing bracket to the door
front using the flat-head screws sup-
plied.

Take off the templates.

Keep the templates in case the dish-
washer is ever fitted with a new door
front.

Hang the door front into the slits in
the machine door outer panel.

Open the dishwasher door slightly.

Adjust the door front for the height
on one side and lightly screw in a
T20 Torx screw on this side.

Adjust the door front height on the
other side and also lightly screw in a
T20 Torx screw on this side.

Shut the dishwasher door.

Check the door front for correct align-
ment.

If necessary unscrew and readjust.

Once the door front is correctly posi-
tioned:

Open the dishwasher door.

Tighten all the Torx screws on the
sides.

Plug the openings for the fixing
screws using the plastic stoppers
provided.

Installing integrated “i” Dishwashers

Содержание G 605





































































Результаты поиска

Содержание G 605

Отзывы:

Похожие инструкции для G 605

Бренды по названию

Популярные бренды

Miele G 605, Руководство по эксплуатации

Результаты поиска

Содержание G 605

Отзывы:

Похожие инструкции для G 605

Бренды по названию

Популярные бренды