Programme options
69
Factory default settings
If you have altered any settings, you
can reset them back to the factory
default settings.
Switch the dishwasher off with the
button, if it is switched on.
Press the
Start
button in and,
whilst
holding it in
, switch the dishwasher
on using the
button.
Keep the
Start
button pressed in for
at least 4 seconds until the
Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Press the
programme selection
button 19 times.
The left programme indicator light will
emit 1 long flash and 9 short flash at
intervals.
The flashing sequence in the time
display indicates whether the setting
deviates from the factory default:
-
: All values are factory default
settings.
-
: At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the
Start
button.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Содержание G 5210
