Miele G 5051 Скачать руководство пользователя страница 69

Страница: 69 / 84

Frequently Asked Questions

Poor cleaning results

Problem

Possible cause and solution

The dishware is not
clean.

The dishware was not loaded correctly.



See notes under “Loading the dishwasher”.

The program was not powerful enough.



Select a more powerful program (see “Program
overview”).



Activate the Extra clean function (see “Extra clean”
under “Options”).

Not enough detergent was dispensed during manual
detergent dispensing.



Use more detergent, or change the brand you are
using.

Items are blocking the path of the spray arms.



Carry out a rotation check and if needed rearrange
the items so that the spray arms can rotate freely.

The filter combination in the wash cabinet is not
clean or was incorrectly fitted.
This may have caused the spray arm jets to become
blocked.



Clean and / or fit the filter combination correctly.



Clean the spray arm jets if necessary (see
“Cleaning the spray arms” under “Cleaning and
care”).

There are smears on
glassware and cutlery.
There is a bluish sheen
on the surface of
glassware. The film can
be wiped off.

The rinse aid dosage is set too high.



Reduce the dosage (see “Rinse aid” under “Before
using for the first time”).

Содержание G 5051





















































































Результаты поиска

Содержание G 5051

Отзывы:

Похожие инструкции для G 5051

Бренды по названию

Популярные бренды

Miele G 5051, Руководство по эксплуатации

Результаты поиска

Содержание G 5051

Отзывы:

Похожие инструкции для G 5051

Бренды по названию

Популярные бренды