Problem solving guide
67
Water inlet fault
Problem
Cause and remedy
The
Inlet/Drain
indic-
ator flashes on and off.
The stopcock is closed.
Open the stopcock fully.
The dishwasher stops
during a programme.
The
Inlet/Drain
indic-
ator flashes.
Fault code
or
ap-
pears in the display.
Before rectifying the problem:
Switch the dishwasher off with the
button.
The water intake is restricted.
Open the stopcock fully and start the programme
again.
Clean the water inlet filter (see "Maintenance").
The water pressure at the intake is lower than 50
kPa (0.5 bar).
Seek professional advice.
Water drainage fault
Problem
Cause and remedy
The dishwasher stops
during a programme.
The
Inlet/Drain
indic-
ator flashes.
Fault code
shows in
the display.
Before rectifying the problem:
Switch the dishwasher off with the
button.
The water outlet is restricted.
There might be water in the wash cabinet.
Clean the filter combination (see "Cleaning and
care, Cleaning the filters").
Clean the drain pump (see "Maintenance").
Clean the non-return valve (see "Maintenance").
Remove any kink or loop in the drain hose.
Содержание G 4940
