Programme options
61
Adjust Automatic
You can adjust the
Automatic
programme so that it will remove
stubborn soiling from an otherwise
lightly soiled load. This will increase
energy consumption.
Switch the dishwasher off with the
button, if it is switched on.
Press the
Start
button in and,
whilst
holding it in
, switch the dishwasher
on using the
button.
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Press the
button five times.
The
indicator light will flash rapidly
five times at intervals.
The flashing sequence in the display
indicates whether "Adjust Automatic" is
activated or not.
–
: "Adjust Automatic" is switched
on.
–
: "Adjust Automatic" is switched
off.
Press the
Start
button to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Содержание G 4930
