Miele G 4700 SCi, Руководство по эксплуатации

Страница: 23 / 84

Before using for the first time
23
Adding salt
Before filling the salt reservoir with
dishwasher salt for the first time, you
must fill it with approx. 2 litre of
water to enable the salt to dissolve.
Once the dishwasher has been used,
there is always sufficient water in the
reservoir.

Remove the lower basket and
unscrew the salt reservoir cap.
Water or saline solution will run out
of the reservoir when the cap is
removed.
It should therefore only be removed
in order to refill the salt reservoir.

Fill the reservoir with approx. 2 litre of
water (first use only).

Place the funnel provided over the
salt reservoir and carefully fill with
salt until the reservoir is full. The salt
reservoir holds approx. 2 kg of salt
depending on the brand used.

Clean any excess salt from around
the reservoir opening and then screw
the cap on again firmly.

Immediately after filling the salt
reservoir, run the Quick wash
programme with the Short
programme option selected and
without any crockery in the
dishwasher, to remove any traces of
salt from the cabinet.