Frequently Asked Questions
52
Water intake fault
Problem
Possible cause and solution
The
Intake/Drain
indica‐
tor flashes on and off.
The water supply is turned off.
Turn on the water supply all the way.
The dishwasher stops
during a program.
The
Intake/Drain
indica‐
tor flashes.
Fault code
or
ap‐
pears in the display.
Before fixing the fault:
Turn the dishwasher off with the
button.
There is a problem with the water intake.
Turn on the water supply fully and start the pro‐
gram again.
Clean the water intake filter (see "Frequently asked
questions").
The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.
Water drainage fault
Problem
Possible cause and solution
The dishwasher stops
during a program.
The
Intake/Drain
indica‐
tor flashes.
Fault code
shows in
the display.
Before fixing the fault:
Turn the dishwasher off with the
button.
There is a problem with the water intake.
There might be water in the wash cabinet.
Clean the filter system (see "Cleaning and care -
Filter system").
Clean the drain pump (see "Frequently asked
questions").
Clean the non-return valve (see "Frequently asked
questions").
Remove any kink or loop in the drain hose.
Содержание G 4222
Страница 62: ...62 ...
Страница 72: ...M Nr 10 014 070 03 en US G 4920 G 4925 ...