With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue
Possible fault
Solution
The Start/Stop indicator
does not flash after the
dishwasher was turned
on with
s
.
The machine is not
plugged in.
Insert the plug.
The fuse has tripped.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The dishwasher stops
during a program.
The fuse has tripped.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The program cycle
indicators "Rinse",
"Drying" and "End"
flash simultaneously.
The time display shows
FXX.
There may be a technical
fault.
–
Turn the dishwasher off
s
.
After a few seconds:
–
Turn the dishwasher on.
–
Select the desired
program with the
program button.
–
Press the "Start/Stop"
button.
If the problem persists call
Technical Service.
The drain pump is
running when the door
is open.
Fault F70:
The waterproof system
has activated.
–
Turn off the water
supply.
–
Call Miele Technical
Service.
Frequently asked questions
36
Содержание G 2420
Страница 52: ...52 ...
Страница 58: ...58 ...
Страница 59: ...59 ...
Страница 60: ...Alterations reserved 1906 G 2420i G 2430i M Nr 06 696 050 02 en US ...