Miele G 1542 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 68

Miele G 1542 Скачать руководство пользователя страница 56

Cleaning the water inlet filter

A filter is incorporated in the screw
connection of the valve on the water
inlet hose. The filter must be cleaned
when dirty, otherwise insufficient water
flows into the wash cabinet.

,

The plastic housing of the water

connection contains an electrical
component. It must not be dipped in
water.

Recommendation

If the mains water contains a large
amount of insoluble substances, we
recommend fitting a large-area filter in
the connection between the stopcock
and the water inlet hose threaded
union. This filter is available from the
Miele Spares Parts dept.

Cleaning the filter:

^

Disconnect the dishwasher from the
mains supply. Switch off at the mains
socket and withdraw the plug.

^

Close the stopcock.

^

Unscrew the inlet hose.

^

Carefully remove the seal.

^

Withdraw the filter using pointed
pliers and rinse clean under running
water.

^

Replace the filter and seal, making
sure they are sitting correctly.

^

Reconnect the inlet hose to the
stopcock, making sure it goes on
correctly and is not cross-threaded.

^

Turn on the stopcock gradually to
test for leaks. If there is a leak, the
inlet hose might not be on securely,
or it may have been screwed on at an
angle. Unscrew and reconnect the
water inlet valve correctly.

Maintenance

56

«
...
54
55
56
57
58
...
»

Содержание G 1542





































































Отзывы:

Нет отзывов